Differences

This shows you the differences between two versions of the page.

--- en:public:femnet:howto:wlan [2021/10/07 15:12] – Translation page created nex
+++ en:public:femnet:howto:wlan [2021/11/30 14:33] (current) – netali
@@ Line 1: / Line 1: @@
-====== wlan ======
+====== How do I configure my WiFi access? ======
+In the FeM-Net, there are multiple WiFi networks, which are available on the campus:
+  * FeM.PSK
+  * FeM.1X
+  * FeM_Welcome
+FeM_Welcome is an open network to which everyone can connect to.
+It offers information about the FeM-Net as well as an automated device regsistration system.
+A full internet access is not available in this network.
+The networks FeM.PSK and FeM.1X both provide a full FeM-Net access and internet access.
+To use these networks, devices must be registered beforehand.
+<WRAP 50% info center>
+If a device can't connect to FeM.PSK or FeM.1X, it might help to [[mac-randomization|disable MAC-randomization]].
+Especially newer devices are affected by this.
+</WRAP>
+===== FeM.PSK =====
+To use FeM.PSK, a password is required.
+This password will be sent via email after the first device is registered for WiFi.
+It is also possible to generate a new password afterwards in case the password gets lost.
+Alternatively, the password can also be set in [[https://myinfo.fem.tu-ilmenau.de/admindb-php/myinfo.php?action=femwlan.start|MyInfo]].
+For this, the device must be connected to the FeM-Net!
+The password email also contains information about the devices the password is valid for.
+However, usually passwords are valid for all registered devices.
+===== FeM.1X =====
+The network FeM.1X uses so-called 802.1X authentication.
+With this mechanism, it is possible to authenticate using a username and password.
+However, the setup is more difficult.
+If the Uni-Login has been submitted with the application for admission, the university login credentials (username: four letters, four numbers) can be used for loggin in to the WiFi network.
+Otherwise, a [[https://info.fem.tu-ilmenau.de|MyInfo login]] has to be created.
+For this, the device must be connected to the FeM-Net (e.g. using the FeM_Welcome WiFi network).
+==== Login credentials ====
+Depending on which type of credentials shall be used, a different configuration must be used:
+=== MyInfo credentials ===
+  * Username: ''USERAME'' or ''USERNAME@auth.fem.tu-ilmenau.de''
+    * (replace ''USERNAME'' with the MyInfo username)
+  * Password: use the MyInfo password
+  * anonymous Identity: anonymous@auth.fem.tu-ilmenau.de
+=== Uni-Login ===
+  * **This method can only be used if a university login was specified on the application for admission**
+  * Username: ''UNI-USERNAME''@fem.tu-ilmenau.de
+    * (replace ''UNI-USERNAME'' with the university login username, e.g. hada1234)
+  * Password: use the password from the university login
+  * anonymous Identity: anonymous@fem.tu-ilmenau.de
+==== Certificate ====
+To prevent attackers from stealing login credentials, the [[https://info.fem.tu-ilmenau.de/admindb-php/downloads/1x-ca-cert.crt|certificate]] needs to be configured for the WiFi network.
+This certificate is also linked as download in the respective configuration sections.
+For the download, the device must be connected to the FeM-Net, e.g. using the FeM_Welcome WiFi network.
+==== WiFi network configuration ====
+Depending on your operating system, the configuration may vary:
+=== Apple MacOS and iOS ===
+The settings for FeM.1X can not be entered manually.
+Instead, [[https://info.fem.tu-ilmenau.de/admindb-php/downloads/FeM-WLAN.mobileconfig|this file]] must be imported (only available in the FeM-Net, e.g. using FeM_Welcome).
+When being asked for login credentials, the credentials from the above section must be used.
+=== Linux ===
+Depending on the network configuration software, different settings must be applied, but the parameters are always the same:
+  * Type: WPA2 enterprise with TTLS and PAP
+  * Identity: see credentials
+  * Anonymous identity: see credentials
+  * Password: see credentials
+  * Client certificate: (none)
+  * CA certificate: [[https://info.fem.tu-ilmenau.de/admindb-php/downloads/1x-ca-cert.crt|download]]
+  * Domain: fem.tu-ilmenau.de
+=== Android ===
+The settings are as follows:
+  * EAP-Type: TTLS
+  * Phase 2: PAP
+  * Server certificate: N/A
+  * CA certificate: [[https://info.fem.tu-ilmenau.de/admindb-php/downloads/1x-ca-cert.crt|download]]
+  * Identity: see credentials
+  * Anonymous identity: see credentials
+  * Password: see credentials
+  * Domain: fem.tu-ilmenau.de
+==== See Also ====
+  * [[en:public:femnet:|Information about the FeM-Net]]
+  * [[mac-randomization|How can I disable MAC-randomization?]]