public:femnet:howto:netzantraege

Unterschiede

Hier werden die Unterschiede zwischen zwei Versionen angezeigt.

Link zu dieser Vergleichsansicht

Beide Seiten der vorigen Revision Vorhergehende Überarbeitung
Nächste Überarbeitung
Vorhergehende Überarbeitung
public:femnet:howto:netzantraege [2021/03/03 15:43] – [Wie kann ich euch erreichen?] nexpublic:femnet:howto:netzantraege [2024/02/14 04:19] (aktuell) oberossie
Zeile 1: Zeile 1:
-====== Hilfe zum Antrag zur Geräteregistrierung / Help for the application for device registration ====== +====== Hilfe zum Antrag zur Geräteregistrierung ======
- +
-<WRAP half info> +
-**English Version [[#help_for_the_application_for_device_registration|below]]** +
-</WRAP>+
  
 ===== Wo finde ich das Formular? ===== ===== Wo finde ich das Formular? =====
Zeile 110: Zeile 106:
 ===== Ich habe einen eigenen WLAN-Router ===== ===== Ich habe einen eigenen WLAN-Router =====
  
-Der Betrieb eines eigenen WLAN-Routers im FeM-Net ist nicht gern gesehen.+Der Betrieb eines eigenen WLAN-Routers im FeM-Net ist nicht in allen Häusern gestattet. In Häusern mit ausgebautem FeM-WLAN sind private Router unsererseits verboten. Solltest du dies dennoch versuchen, droht ein permanenter Entzug der Nutzungsberechtigung für den LAN-Zugang.
 Zum einen stören sich die Funksignale des Routers mit denen anderer Router, was letztlich alle Nutzer beeinträchtigen kann. Zum einen stören sich die Funksignale des Routers mit denen anderer Router, was letztlich alle Nutzer beeinträchtigen kann.
 Auf der anderen Seite bereitet die korrekte Konfiguration des WLAN-Routers vielen Nutzern Schwierigkeiten. Auf der anderen Seite bereitet die korrekte Konfiguration des WLAN-Routers vielen Nutzern Schwierigkeiten.
-Wir bieten daher in weiten Teilen des FeM-Net unser eigenes von uns zentral verwaltetes FeM-WLAN an. 
  
-Solltest du dennoch deinen eigenen WLAN-Router betreiben wollen/müssen, solltest du das folgende beachten:+Solltest du dennoch in erlaubten Häusern deinen eigenen WLAN-Router betreiben wollen/müssen, solltest du das folgende beachten:
   * NAT muss an deinem WLAN-Router deaktiviert sein.   * NAT muss an deinem WLAN-Router deaktiviert sein.
     * Durch NAT wird verschleiert, welche Geräte hinter dem WLAN-Router hängen. Dadurch können wir nicht mehr die Nutzer identifizieren, die das Netzwerk nutzen und z.B. im Falle eines Virenbefalls gezielt reagieren.     * Durch NAT wird verschleiert, welche Geräte hinter dem WLAN-Router hängen. Dadurch können wir nicht mehr die Nutzer identifizieren, die das Netzwerk nutzen und z.B. im Falle eines Virenbefalls gezielt reagieren.
-    * Der Betrieb von NAT ist gemäß unserer [[https://fem.tu-ilmenau.de/fem-net/nutzerordnung/|Nutzerordnung]] verboten und kann zum Entzug der Nutzungsberechtigung für das FeM-Net führen.+    * Der Betrieb von NAT ist gemäß unserer [[https://fem.tu-ilmenau.de/dokumente/nutzungsvereinbarung-fuer-die-vereinsanlagen/|Nutzerordnung]] verboten und kann zum Entzug der Nutzungsberechtigung für das FeM-Net führen.
   * Viele WLAN-Router benennen das deaktivieren von NAT nicht explizit. Die Einstellung hierfür hat verschiedene Namen, z.B.:   * Viele WLAN-Router benennen das deaktivieren von NAT nicht explizit. Die Einstellung hierfür hat verschiedene Namen, z.B.:
     * TP-Link: „AP-Mode“     * TP-Link: „AP-Mode“
Zeile 128: Zeile 123:
 Ein WLAN-AP soll also nur zwischen Kabel und Funk bridgen. Ein WLAN-AP soll also nur zwischen Kabel und Funk bridgen.
  
-====== Help for the application for device registration ====== +===== Siehe Auch =====
- +
-===== How can I reach out to you guys? ===== +
- +
-You can submit your applications for device registration and ask questions to our Admins at <helpdesk@fem.tu-ilmenau.de>+
- +
-===== Membership data ===== +
- +
-===== Where can I find the form? ===== +
- +
-You can download the form [[https://www.fem.tu-ilmenau.de/fileadmin/user_upload/netzantrag-2020.pdf|as PDF here]]. +
-The form contains all the information we need to register your devices, but you can also submit this information via email to <admin@fem.tu-ilmenau.de>+
- +
-==== Why do you need this data? ==== +
- +
-We need this data to identify you in our database. +
-It's best if you know your member ID as we can identify you immediately using your member ID. +
-If you don't know your member ID, you need to fill out the other fields. +
-**You should fill out these fields the same way you had filled them out in your application for admission!** +
- +
-==== What is my membership ID? ==== +
- +
-You membership ID is a unique number we use internally to identify you. +
-Almost all requests can be fulfilled using only your membership ID to identify you. +
-If your membership ID is not known to you, we need to know your personal data (first name, last name, email) to identify you, which makes it sometimes harder to identify you. +
- +
-You receive your membership ID via email soon after you've become a member of our association. +
- +
-===== Device data ===== +
- +
-==== House ==== +
-Here you tell us the name of the house you live in, e.g.: A, B, K, Q, CJD, ProPhiS (Prof.-Philippow-Str.). +
-We don't need an exact address. +
- +
-For houses with multiple entrances (e.g. K, L) we recommend also writing down the name of the entrance (e.g. L 6d). +
- +
-==== Room ==== +
-Here you tell us your room number. +
-If you live in a dorm of the Studierendenwerk, the room number which is written down on your dormitory contract is the right one. +
- +
-==== Socket-Nr. ==== +
-This field is optional and not available for every room. +
-If your network socket has a label (this is normally directly over the actual network socket), you can write it down here. +
-With this information we can find your socket more easily and we might note, if there is a mistake in your application. +
- +
-==== MAC-address ==== +
-The MAC-address is an address, which can uniquely identify your network adapter. +
-**Every network adapter has its own MAC-address. +
-Therefore you normally have separate MAC-addresses for WiFi and Ethernet/LAN.** +
- +
-=== How to I find my MAC-address? === +
-== LAN/Ethernet/Cable == +
-Just plug in your device to the network socket in your room. +
-If your device hasn't already been registered, your Port is being locked and you are redirected to the MyInfo-website. +
-There you can see the MAC-address of your device. +
- +
-== WLAN/WiFi == +
-Connect your device to the ''FeM_Welcome'' network. +
-Depending on your location, we can determine your MAC-address and show it to your here. +
-//However, this doesn't always work.// +
- +
-== Android-smartphone == +
-  * Open your settings +
-  * Navigate to system > phone information > status +
-  * There should be a field called “Wi-Fi-MAC-address” showing your MAC-address +
-    * **Attention! The MAC-address in the field “Bluetooth-MAC-address” is the wrong address!** +
- +
-== iOS-smartphone == +
- +
-  * Open your settings +
-    * Navigate to General > About +
-    * There should be a field called “Wi-Fi-Address” showing your MAC-address +
-      * **Attention! The MAC-address in the field “Bluetooth” is the wrong address!** +
- +
-== Linux-PC == +
- +
-  * Open a Terminal +
-  * Enter the command ''ip link'' +
-  * You should now see an output like this: +
- +
-<code> +
-1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000 +
-    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 +
-2: enp2s0f1: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc fq_codel state DOWN mode DEFAULT group default qlen 1000 +
-    link/ether XX:XX:XX:XX:XX:XX brd ff:ff:ff:ff:ff:ff +
-3: wlp3s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP mode DORMANT group default qlen 1000 +
-    link/ether YY:YY:YY:YY:YY:YY brd ff:ff:ff:ff:ff:ff +
-</code> +
- +
-  * Under ''enp2s0f1'' (or similar!) you see the MAC-address of your cable bound connection (here: ''XX:XX:XX:XX:XX:XX''+
-  * Under ''wlp3s0'' (or similar!) you see the MAC-address of your Wi-Fi connection (here: ''YY:YY:YY:YY:YY:YY''+
- +
-== Windows-PC == +
- +
-  * Press Windows+R at the same time. +
-  * Enter ''cmd'' and press the Enter-Key. A command prompt should now have opened up. +
-  * In the command prompt, enter ''getmac /v''. You should now be able to see all MAC-addresses your computer has. +
-    * Under “Ethernet” or “LAN-connection” you can find the MAC-address of your cable bound connection. Under “Wireless LAN”/“WLAN”/“Wi-Fi” you can find the MAC-address of your Wi-Fi connection. +
-    * The MAC address is shown under “physical address”. +
- +
-== Mac OS-X == +
- +
-  * Open you system settings +
-  * Open Network > Ethernet +
-  * The “Ethernet-ID” is your MAC-address for cable bound connection +
- +
-===== I have my own WiFi-router ===== +
- +
-We don't like seeing private WiFi-routers being used in the FeM-Net. +
-On one hand, they can disturb the radio signals of the other routers' signals which can affect ever user. +
-On the other hand, the configuring the WiFi-router the correct way seems to be quite hard for many users. +
-In many places in the FeM-Net we provide our own FeM-WiFi networks. +
- +
-If you still intend/need to use your own WiFi-router, please consider the following: +
-  * Your device **must not have NAT enabled** +
-    * Using NAT, the devices behind your WiFi-router get hidden. Therefore, we can't identify the users which use the network and e.g. in case of an infection with a computer virus we can't react to the very device which has been infected. +
-    * Using NAT is per our [[https://fem.tu-ilmenau.de/fem-net/nutzerordnung/|Terms of Use]] prohibited and can lead to the withdrawal of the access to the FeM-Net. +
-  * Many WiFi-routers name the option to disable NAT not explicitly. The settings for this have various names, e.g.: +
-    * TP-Link: „AP-Mode“ +
-    * FritzBox: „IP-Client“+
  
-We have a separate [[nat|help page]] dedicated to disabling NAT on your Wi-Fi router.+  * [[..:|Hilfeseiten und Informationen zum FeM-Net]]
  • public/femnet/howto/netzantraege.1614782619.txt.gz
  • Zuletzt geändert: 2021/03/03 15:43
  • von nex